Ring’s $199 Door View Cam is a lot different than. Rather than a doorframe-mounted, hardwired or battery-power doorbell, this buzzer is mounted to the middle of your door.
It’s designed specifically to go on apartment doors with peepholes, replacing your old peephole, and installs without any wires or screws. Otherwise, this doorbell looks, performs and has similar features to Ring’s other cameras. Set it up using the the same Ring app, where you can view the live feed, adjust settings and more.
The Door View Cam works with, if you have . Use a smart display to see the video feed on a larger screen and talk directly to the person at your door, all with simple voice commands.
There’s still a charge for even the most entry-level cloud storage option, Ring Protect, which begins at $3 per month and gives you 60 days of access to saved activity-based video clips. This will be even more disappointing after for its HomeKit-enabled cameras when iOS 13 launches.
The portion of the doorbell mount that goes inside your door is more flimsy and plasticky than the camera on the outside. Because there aren’t any screws mounted directly to the door, it feels even less secure when I remove the faceplate to get to the rechargeable battery installed in the baseplate.
That certainly isn’t a dealbreaker, but I do think $199 is pushing it slightly for this product because of its simpler hardware, more minimal installation and plasticky inside mount.
The bigger potential concern relates to privacy. Ring and local police departments in the Unied States offer discounted — and occasionally, free — Ring doorbells to residents. In exchange, .
Overall, this doorbell is the best option today for anyone who can’t or otherwise doesn’t want to bother with hardwiring or messing up their doorframe with screw holes. It’s designed for apartment-dwellers, but any home with a peephole could make good use of this product, provided you’re willing to pay the $3 monthly fee — and understand the current privacy landscape of these technologies.
What’s in the box?
Out of the box, you get the camera, which mounts to the front of your door, and a backing that mounts to the inside of your door. The inside and outside portions still have a built-in peephole so you can see who’s at your door just like before.
The inside portion comes in two pieces, a baseplate and a faceplate, so you can remove only the faceplate to access the battery inside. As I mentioned above, the baseplate pulled away from the door nearly every time I removed the faceplate, since it isn’t really tethered to the door at the bottom. It’s only connected to the door via the peephole at the top. So while it didn’t feel like it was going to break, or fall off — it is held in place by the included tightening nut — the bottom half pulls away from the door too easily.
The installation process is extremely simple, certainly the easiest I’ve ever experienced. There’s no need to bother with circuit breakers, electrical wiring — or even using a screwdriver. It literally took me 20 minutes from start to finish, including configuring the Door View Cam in the app. And it only took that long because I was borrowing a coworker’s door to test it, and was extra careful along the way to not mess up the paint or otherwise ruin her door.
Note: Small bits of chipped paint here and there as you’re removing the peephole should be the extent of the problems you encounter installing this thing. In the case of my coworker’s door, the original peephole was mounted through a door knocker. Removing the door knocker did chip the paint very slightly, but removing the peephole itself didn’t cause any damage.
Check out the gallery above, as well as my video, embedded on this page, for the full installation details. But this process was incredibly simple. There’s even a peephole extender if the opening in your door is a little larger than the one attached to the Door View Cam.
The camera itself is shorter and has a slimmer profile than Ring’s other doorbells, but looks similar to thein terms of style. It also has the same feature components — a camera with a 155-degree horizontal field of view, a motion detector, a speaker, a microphone and a button to ring the doorbell. And even though it is installed in the center of the door, no one will have trouble recognizing it as a doorbell.
Ring gives you a lot of options to customize your settings based on your needs. Even during configuration, the app asks a series of questions, like, whether you have a storm door, if your street is particularly busy and accounts for those things accordingly in the settings. With a storm door, for instance, Ring automatically shuts off night vision, since the lights used for night vision could reflect back into the camera when there’s a glass door in front of the camera.
You can also go into the Ring app any time and make changes.